Lithium battery tapes
Product Descriptions:
Product Applications:
Product application range: It is used for
the termination and insulation fixation of
the tab position and winding position of
cylindrical and square, small and
medium-sized lithium electronic batteries
and large-scale power batteries, lithium
battery cells, etc., to stop and prevent
puncture. Complies with ROHS, does not
contain silicon, and does not contain
halogen.
Features/Benefits
● Strong electrolyte resistance
● High electrical insulation
● Has proper adhesion
Mechanical Properties:
| Name | Battery tape |
| colour | Green |
| Adhesive |
Acrylic |
| Backing | PET |
| Adhesion (N/25mm) | ＞1 |
| Tensile strength (N/25mm) | ≥65 |
| Resistant to electrolyte (85/24H) | Approved |
| Tensile strength (N/25mm) | ＞25 N.M |
| ROHS | Approved |
| Heat distortion temperature | 100-120℃ |
| 卤素Halogen | Approved |
| Note: The data recorded in this TDS are representative values rather than guaranteed values. To improve product performance, specifications are subject to change without notice. The use of the product recorded in this TDS is only an example. The product can have various application scenarios and environments, which are beyond our control. Therefore, you need to make your own sufficient before using the product to determine whether the product is suitable for your production process and conditions. Evaluate to confirm whether its performance and effect are in line with expectations. For Industries that need to be considered safe, please test and confirm their safety in advance. In addition, the company does not guarantee that the use described in this TDS will not cause any patent infringement. Before using this product, please carefully read the explanatory text and safety data sheet (MSDS) marked on the main body of the product. This product is manufactured for general industrial Industries. Do not use for medical purposes. The product may precipitate during storage. This is a normal phenomenon. Please mix well before use and strictly follow the product storage and transportation instructions. In order to obtain the best performance, the bonding surface should be clean, dry and free of grease. For high-strength structural bonds, special surface treatment can increase bond strength and durability. The material taken out of the container may be contaminated during use. Do not put the material back into the original container. Duxerialscannot be held responsible for products that are contaminated or stored under non-instructed conditions. | |