Products
Product Series
-
3060TC Temperature Controlling Sheet Heaters
① fast heating, even heat distribution, temperature balance point before arrival, rapid heating, heating fast, temperature balance point reached, low steady-state power;
② Self-regulating power, self-controlled temperature heater STC material with resistivity increases with the temperature of the characteristics of STC components before reaching a specific temperature, the resistance value changes very slowly with the temperature when exceeding this specific temperature, the resistance value of the STC element increases sharply, to achieve the adjustment effect;
③ point-by-point adjustment function, self-controlled temperature heater can carry out point-level temperature regulation, when the heater at a point temperature becomes lower, this point resistance will be rapidly reduced, began to increase the power of rapid heating, to ensure temperature balance;
3620 Carbon Crystal Electric Plate Heater
3620 Carbon Crystal Electric Plate Heater heating inertia is small, high temperature control accuracy, heat conversion rate is fast Fast and other advantages;
3620 Carbon Crystal Electric Plate Heater can be easily integrated with thin insulation materials, providing light electric heating elements with insulation layer;
3620 Carbon Crystal Electric Plate Heater series products safe, reliable, long service life;
3620 Carbon Crystal Electric Plate Heater can bring its own PSA adhesive, easy and fast installation. ...
3610 Far-Infrared Heating Module Heaters
• The heat conversion rate is as high as 98%:
• Graphene far infrared heating film;
• High voltage resistance, can be used in high-voltage products;
• The use of far infrared heating, conducive to human health products easy to process characteristics;
3600 ITO Transparent Thin Film Heaters
• Can see the transparency of 85%, higher than the traditional glass transparency;
• Not afraid of bright light, attached to the screen picture quality is still clear;
• The weight thickness is ultra-light and thin, the heating is fast and uniform, the power-on 5 seconds can reach the set temperature (50 degrees C), the maximum temperature resistance can reach 120 degrees C;
• Can be self-adhesive, do not take up space, simple and convenient operation;
• More can be developed according to customer needs to make any size specifications and shapes;
• Voltage settings from 1.5V to 380V can be designed and produced.
4180 MHC Sheet & Molded Assembly Heater
4180MHC heating plate heating plate has high mechanical processing strength, and can be made into any shape according to customer requirements;4180MHC heating plate heating plate has high-strength insulation and pressure resistance, as well as good moisture-proof characteristics, and has incomparable advantages in safety performance;The 4180MHC heating plate is laminated with stainless steel, which has a stronger composite strength than the traditional hard insulating plate. It will not appear after long-term use, and the phenomenon of layered bubbles will not occur. It is the leader of the hard heating plate;The 4180MHC heating plate heating plate has no open flame when heating, the metal foil and stainless steel are firmly bonded and have flame-retardant characteristics, and the use is safe and reliable;The thickness of the heating plate of the 4180MHC heating plate can be customized as required. The thinnest is 0.2mm, and the thickest can reach 3mm or even thicker. You can customize the thickness you want according to the user during installation;4180MHC heating plate heating plate can be equipped with PSA self-adhesive, easy and fast installation;4180MHC heating plate heating plate series products are safe, reliable, and have a long service life;
4210 Battery Heating Film Module
● Fast Heating；Temperature Uniformity；
● High strength；Soft and easy to use；
● Rohs and not easy to age；
● Light weight and super thin；
4710 Mica Heaters Plate
4710 Mica Heaters Plate is a new generation of products, electric film heating itself without oxidation, so the service life can be in 100,000 hours, it is not only high heating efficiency, but also heat dissipation is relatively fast. Because the electric film electric heater uses far-infrared heat delivery method, can be said to be rapid heating.
4610 PTC Aluminium Foil Heaters
● Heat transfer rate up to 98%;
● Aluminum as heat sink substrate,Excellent heat transfer performance;
● High withstand voltage performance，Can apply to high voltage products;
● Aluminum products ease of processing,can make various of constant temperatureheating board, air-conditioning heater,fan heater series products;
● PTC material has excellent automaticConstant temperature, safety to use, moreenergy saving;
4110 Battery Silicone PET Film Heaters
● Fast Heating；Temperature Uniformity ;
● High Strength；
● Soft and Easy Operation；
● Rohs and Not easy to age ；
4150 Aluminum Foil Plate Heaters
● Uniform heat distribution, have good heat dissipationeffect, product is rigid PCB and easy to install, with doublesideadhesive and can stick on the heat surface directly.
● High insulating performance, can support 2500VDChi-pot test, safe to use and the standard higher thancountry standard.
● Use aluminium sheet and silicone for substrate,aluminium sheet has good thermal conductivity, be betterto transfer the heat energy to heating parts,silicone has good shockproof and waterproof with voltageproof performance etc, Is one of the most characteristicproducts of heater board．
4140 Epoxy Thin Film Heaters
● Ultra-thin, only 0.2mm , small footprint;
● The resistive circuit has a uniform arrangement, a small thermal inertia, close contact with the heated body, and a rapid temperature increase. Extremely low saturatedvapor pressure with insulating materials,low gassing;
● The product is hard plate, easy to install,with double-sided can be directly affixed to thesurface of the heated body;
● High insulation performance, can with stand 3500V DC high voltage test, use more secure;
4130 Silicone Rubber Heaters
● Heat conversion rate is as high as 98%, strongplasticity;
● Even temperature,available to be designedinto any shape;
● The material has the characteristics of shockresistance,compression resistance,wearresistance,etc.
● Soft,ultra-thin,and good insulation; Metal heating body,long life,stable power;
● High mechanical strength,can withstand100kg/cm²;
● The surface can be waterproof,not completelywaterproof.When it contact with water,it canbe powered off and wiped,but don’t placeand immerse into water.
4120 Kapton Polyimide Film Heaters
● Fever fast
● Uniform temperature
●The material is anti-corrosion and
● anti-chemical.
● Soft and thin
● Metal heating as the body, long life.
4110 PET Film Flexible Heaters
● Uniform and good heat dissipation;
● Small footprint,light weight; thickness≤ 0.2mm;
● Surface heat, high thermal efficiency, energysaving, heating to the specified temperatureonly need 90 seconds;
● This series of products is safe and reliable, andthe metal heating body has a longer service life;
● Heating body can use foil/carbon ink design,Can be customized according to customerrequirements
-
091207 Natural Thermal Graphite Sheets
▪ Natural graphite thermal conductivity is 150-300 W/M.K;
▪ flexible flakes, can be processed into a variety of shapes, good bending performance;
▪ density is 1.0-1.5 g/cm³ (approximately 1/3-3/4 of aluminum or 1/5-1/4 of copper);
▪ can be used for electromagnetic shielding;
091201 Artificial Graphite Sheets
The 091201 series of artificial graphite thermal film allows electronic equipment products to be miniaturized, thin and lightweight, and widely used in small clearance and non-insulated environments, to a certain extent to meet the consumer demand for electronic products thin and light. Artificial graphite material thermal conductivity anisotropy, in the direction of thickness, with the same thermal conductivity as conventional thermal interface materials, on the plane, with much better thermal conductivity than metal, can quickly take away the heat, play the effect of average heat.
091201 Artificial Graphite Sheets
091201 belongs to the de-alcohol-type single component room temperature silicone sulfide rubber products, high thermal conductivity, with a faster drying and vulcanization speed, flame retardant grade reached UL94 V0 class, the product vulcanization of the metal non-corrosive, easy to use.
3101 Thermal Grease/Paste
Duxerials 3101 of products is the liquid siloxane complex mechanically or manually into the device equipped with electronic components, lines, curing at room temperature or heating conditions to become excellent performance of thermoset polymer insulation materials, the process used in the liquid siloxane complex is the sealing glue.
▪ low viscosity, good leveling, suitable for complex electronic accessories and LED potting;
▪ the toughness after curing is good, the impact resistance is good;
▪ heat resistance, moisture resistance, cold resistance is excellent, after application can extend the life of electronic accessories;
▪ plus molding, can be cured at room temperature and heating;
▪ has excellent moisture and water resistance.
6006 Thermally Conductive Potting
6006 thermal silicone grease commonly known as thermal paste, thermal grease to silicone as the main raw material, add heat-resistant, excellent thermal conductivity of materials, made of thermal-conducting silicone lipid compound.
▪ has low oil separation, high and low temperature, water, ozone, climate aging;
▪ can be used for a long time at temperatures of -40℃ - 150℃;
▪ thermal grease has excellent thermal conductivity, electrical insulation, stability of use, low consistency and good construction performance.
T650 Thermally Conductive Greases
Duxerials T650 Thermally Conductive Greasess have high thermal conductivity and adhesion, high material stability, slow thermal conductivity decay, and meet long-term use requirements under thermal cycling conditions.
▪ Two-component silica gel, ultra-low thermal resistance, thermal resistance ≤0.09 cm²·℃/w；
▪ Curing at room temperature, low shrinkage, meeting the process requirements of precision period；
▪ Has good water resistance；
▪ Super adhesion, saving screws；
▪ High material stability, slow thermal conductivity decay, meeting the long-term use requirements under thermal cycling conditions.
1745 Thermally Conductive Adhesives
Duxerials 1745 series thermal conductive adhesive is made of silicone resin as the base material, adding thermal conductive fillers and bonding materials. It has excellent weather resistance, low mechanical stress and high compression deformation performance, superior dielectric properties, and no volatiles. It has low consistency and good construction performance, with self-adhesiveness, suitable for filling in irregular gaps.
▪ Low thermal resistance;
▪ Excellent environmental resistance;
▪ Low shrinkage, meeting process requirements during precision period, and having good water resistance;
▪ High material stability, slow thermal conductivity decay, meeting the long-term use requirements under thermal cycling conditions.
T635 Thermally Conductive Gels
The T635 thermally Conductive Silicone Rubber gel, also known as thermally conductive putty, thermally conductive mortar, etc, is made of silicone resin as the base material, added with thermally conductive fillers and bonding materials.
Thermally Conductive Silicone Rubber gel has excellent high and low temperature resistance, low mechanical stress and high compression deformation. Performance, excellent weather resistance, radiation resistance and superior dielectric properties, no volatiles.
Thermally Conductive Silicone Rubber gel is suitable for filling the surface gaps of various microwave devices such as microwave communication, microwave transmission equipment, microwave special power supply, stabilized power supply, etc., and provides excellent thermal conductivity for electronic components that generate heat.
Thermal conductivity silica gel sheet (1~ 15W)
Duxerials thermal Conductive Silicone Rubber is specially designed for use of gap heat transfer scheme, can fill the gap, to complete the heat transfer between the heating parts and cooling parts, also play a role such as insulation, shock absorption, seal, can meet the design requirements of the device miniaturization, manufacturability and practicability, applicability is wide and thickness, is an excellent thermal conductive filler material.
▪ Soft, good compressibility;
▪ 1 ~ 15.6 W/M.K thermal conductivity;
▪ Low thermal resistance;
▪ Fire rating reaches UL-94 V0.
091201 Artificial Graphite Sheets
● 1000-1900W/m.k thermal conductivity;
● Light weight ,Easy Processing;
● Low resistance;
● High efficiency of heat transfer.
974 Thermally Conductive Gap Filler Pads
● Ultra Soft and High Compressibility;
● 3.5 W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● UL94 V0 Recognized;
● Natural Sticky;
6006 Thermally Conductive Potting
● Low viscosity, good leveling, suitable for complex electronic parts and LED potting;
● After curing good toughness, good impact resistance;It has excellent moisture, water effect;
● Plus forming, and heat curing at room temperature;
● Heat resistance, moisture resistance, excellent cold resistance, can extend the life of the electronic parts after application;
976 Thermally Conductive Gap Filler Pads
● Ultra Soft and High Compressibility;
● 2.0 W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● UL94 V-0 Recognized;
● Natural Sticky;
579 Thermally Conductive Gap Filler Pads
● Ultra Soft and High Compressibility;
● 2.5 W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● UL94 V0 Recognized;
● Natural Sticky;
570 Thermally Conductive Gap Filler Pads
● Ultra Soft and High Compressibility;
● 4.0 W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● UL94 V0 Recognized;
● Natural Sticky;
580 Thermally Conductive Gap Filler Pads
● Ultra Soft and High Compressibility;
● 6.0 W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● UL94 V0 Recognized;
● Natural Sticky;
High Tensile Strength Thermally Conductive Pads
● 0.8~1.0 W/m.k Thermal Conductivity；Self tacky；
● Low thermal impedence；V-0 Recnogizned；
● Ultra Soft and High Compressibility；
● With expansive fire-fighting capabilities；
6006 Thermally Conductive Potting
● Thermal grease with low oil departure degree;
● Excellent thermal conductivity;
● Thermal grease with electrical insulation;
● High temperature resistance;
● Thermal grease with low consistency and good construction performance;
T650 Thermally Conductive Greases glue
● Thermal conductive adhesive glue bicomponent epoxy non-solvent adhesive with low thermal resistance;
● Room temperature curable with low shrinkage, can meet the technology requirement of precision,and have apreferable waterproof;
● Thermal conductive adhesive glue with strong adhesion and do not need screw;
● High stability and slow in thermal conductivity, can be long-term use under the condition of meet the need of thermal cycle.
5912 Thermal Conductive Tapes
● Thermal double-sided tape has excellent softness,tight attaching,self-adhesive and high compression ratio;
● 0.4W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● Natural Sticky;
T635 Thermally Conductive Gels
● T635 Thermally Conductive Gels with 2.0~4.5W/m.k thermal conductivity;
● Low thermal resistance;
● Low shrinkage rate, meet the process requirements of precision devices, excellent water resistance;
● High material stability, slow-speed thermla conductivity attenuation, meet the long-term use requirements under thermal cycling conditions;
8010 Fire-Retardant Thermally Conductive Pads
● Fire-extinguishing thermal pad Ultra Soft and High Compressibility；
● 1.0~5.0 W/m.k Thermal Conductivity；Self tacky；
● Low thermal impedence；V-0 Recnogizned；
● With expansive fire-fighting capabilities；
TAP11 Thermally Conductive Pads
● Ultra Soft and High Compressibility;
● 3.0 W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● UL94 V0 Recognized;
● Natural Sticky;
T400 Thermally Conductive Pads
● Ultra Soft and High Compressibility;
● 5.0 W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● UL94 V0 Recognized;
● Natural Sticky;
T500 Thermally Conductive Pads
● Ultra Soft and High Compressibility;
● 7.0 W/m.k Thermal Conductivity;
● Low Thermal Impedance;
● UL94 V0 Recognized;
● Natural Sticky;
-
4090-PCMs Phase Change Materials
● Enthalpy value: 80;
● Thermal conductivity: 0.6w /m.k;
● Large specific heat;
● Easy cutting and low density;
3090-PCMs Phase Change Materials
● High tensile strength;
● Thermal conductivity: 1.0w /m.K;
● Large specific heat;
● Easy cutting and low density;
2090-PCMs Phase Change Materials
● Enthalpy value: 150 J/g;
● Thermal conductivity: 2.0w /m.K;
● Large specific heat capacity;
● Easy cutting, low density.
3800-PCMs Phase Change Materials
● Low Heat Resistance；
● Large Heat Capacity；
● Eacy cutting and small density；
● RoHs.
1015 Heat Insulation Materials
● Thermal insulation；
● Water-proof & Fire-proof；
● Heat-resistant & Durable, Environment-friendly；
● Soft & Sound insulation & Shock-resistant；
● Easy to cut & Low density .
4080-Nano-Graphite Powder
▪ Insulation resistance voltage > 2000V (60μm DC);
▪ Good heat dissipation, can be sprayed on different metal radiator material, speed up theheat of radiator surface and airExchange rate, heat dissipation efficiency increased by morethan 15%;
▪ 4080-Nano-Graphite Powder has good thermal stability, chemical stability and weather resistance;
▪ Strong adhesion to metal, to meet the requirements of hundreds of tests;
▪ Meet RoHS 2.0 and halogen regulations;
▪ Store at room temperature;
▪ Coating curing condition: 200°C/15 Min
-
Quantum dot film (QD film)
● Full color display;
● Narrow band Continuous Spectrum, High color purity;
● Inorganic materials, High stability, Long shelf life, Not to age;
● High efficiency strong energy saving;
● 110% close to natural light, color recover fast, excellent color rendering.
Flexible Magnetic Sheets Series
● Flexible ferrite sheets for 13.56 MHz NFC RFID application & wireless charging application;
● Made by thin,high permeability sintered ferrite with PET film and adhesive tape;
● Standard ferrite layer thickness 0.05mm, 0.06mm,0.08mm,0.1mm,0.15mm and 0.2mm;
● Custom size or thickness available upon request;Operating temperature -40℃ to 85℃；
● RoHs compliant.
Conductive Silicone Rubber
● Ultra low resistance and excellent shielding performance;
● Excellent mechanical properties and softness,can be punched into any shape;
● The long-term durability.
Conductive Foam
● High shielding effectiveness Conductive Foam；
● Well oxidation resistance, corrosion resistance electrical Conductive Foam；
● Excellent wear resistance, high reliability EMI shielding Conductive Foam；
Fe-based Amorphous Alloy Strip
● Super micro grain structure;
● High permeability;
● High saturation magnetic induction;
● Low core loss, Good stability;
Amorphous and Nanocrystalline Tape
● Low coercivity;High permeabilty;
● High saturation magnetic induction;
● Low core loss;Good stability;
● High strength and high toughness;
Shielding Sheets for Wireless Charging
● High permeability(500-1000)—Improve charging efficiency;
● Ultrathin, as low as 30μ m—The size can be produced according to customers;
● High Bs—Reduce Magnetic sheet volume and thickness;
● Low core loss—Reduce eddy current losses, improve charging efficiency;
● Flexible material—Avoid magnetic flux leakage,convenient operation;
Shielding Sheets for for NFC/RFID
● High permeability(400-700)— avoid mishandling，assure identification range;
● Ultrathin,minimum thickness 30um—Size andthickness could be customized;
● High saturation intensification of magnetic induction—effectively reduce magnetic disk volume;
● Softness—effectively avoid magnetic disk to break and leakage,it is easy to use.
Flexible EMI absorber sheets
● Can make products with multi-layer structures;
● The material is thin, flexible and easy to machined;
● Good wear resistance, not easy to damage causepermeability reduction;
● Flexible material—avoid magneticflux leakage,easy to operate.
Shielding Sheets for Graphics Tablet
● Multilayer shielding structure，outside covered with high permeability alloy material，shielding external magnetic field;
● Highsaturation magnetic induction;
● Material thin, good flexibility, good wear resistance;
● Low loss - enhanced magnetic flux;
● Flexible material;Easy to operate;
-
Double Coated Tapes
▪ two-component epoxy non-solvent type, ultra-low thermal resistance;
▪ normal temperature curing, low shrinkage, excellent adhesion relay, to meet the requirements of precision process, has better water resistance;
▪ material stability is high, thermal conductivity attenuation is slow, to meet the long-term use requirements under thermal cycle conditions.
Single Coated Tapes
▪ two-component epoxy non-solvent type, ultra-low thermal resistance;
▪ DuxerialsSingle Coated Tapes is cured at room temperature, has low shrinkage, has excellent adhesion, and has better water resistance.
Polyimide film tapes
▪ single-component epoxy non-solvent type, ultra-low thermal resistance;
▪ normal temperature curing, low shrinkage, excellent adhesion relay, to meet the requirements of precision process, has better water resistance.
Polyester (PET) Film Tape
▪ No medium viscosity, medium strength, removable, high-touch denaturation single component solvent-free acrylic adhesive;
▪ Easy to apply glue, easy to remove, fast curing speed, complete filling thread gap, anti-impact vibration;
Foam Tapes
▪ Solvent-free, non-volatile single-component photocurable adhesive;
▪ 360-400nm wavelength ultraviolet light irradiation curing, curing period is short, shrinkage is low, the glass substrate adhesion is strong, to meet the requirements of precision process, good water resistance;
▪ High material stability, good toughness, shock resistance, to meet the requirements of long-term use;
Metal Foil Tapes
▪ Two-component solvent-free acrylic adhesive;
▪ Normal temperature curing, low shrinkage, ultra-strong adhesion relay, in the precision cycle to meet the requirements of the process, with good water resistance:
▪ The material has high stability and slow thermal conductivity, and meets the requirements for a long time.
Battery Tapes
▪ Two-component epoxy non-solvent type;
▪ Normal temperature curing, low shrinkage;
▪ The adhesive relay is super strong to meet the process requirements during precision;
▪ Good water resistance.
Silicone PTFE Film Tape
▪ Two-component silica gel, ultra-low resistance, volume resistance ≤0.02 ohm.cm;
▪ Normal temperature curing, low shrinkage rate, to meet the requirements of precisionperiod, with good water resistance;
▪ The material has high stability and slow performance attenuation, which can meet therequirement of long-term use under the condition of thermal cycling.